TZR Forum

General Category => Gallery => Topic started by: TZR2503MA on October 05, 2017, 10:55:51 PM

Title: Images Thread - 3MA
Post by: TZR2503MA on October 05, 2017, 10:55:51 PM
How about we have a stickey based on each model??   ;D
Share a few decent shots of your 3MA... It would make a good collection of bikes on this forum - just an image or two..

Good or bad idea??

Title: Re: Images Thread - 3MA
Post by: morepower on October 07, 2017, 09:02:54 PM
How about we have a stickey based on each model??   ;D
Share a few decent shots of your 3MA... It would make a good collection of bikes on this forum - just an image or two..

Good or bad idea??

Good idea... Here is mine.. Although I am waiting for it to arrive as it is being shipped next month and coming from Japan.
Title: Re: Images Thread - 3MA
Post by: rubberfingers on October 14, 2017, 11:49:09 AM
Here is my 3ma to be added to the images thread

Andy

Title: Re: Images Thread - 3MA
Post by: mellorp on October 14, 2017, 12:26:45 PM
1 image each would be good. My 3MA4 SP with some TZ bodywork

(http://i1366.photobucket.com/albums/r767/Mellorp/Yamaha%203MA%20SP/003_zpsqmaqjvcf.jpg~original) (http://s1366.photobucket.com/user/Mellorp/media/Yamaha%203MA%20SP/003_zpsqmaqjvcf.jpg.html)
Title: Re: Images Thread - 3MA
Post by: casal-fan on October 28, 2017, 12:04:30 PM
Sorry, havent seen this post...
My track 3MA... still a work in progress :)
Title: Re: Images Thread - 3MA
Post by: morepower on November 29, 2017, 11:35:15 AM
My latest one... It will be repainted but the design is not going to change it is just a refresh and a little tweak to the bit where race number boards would go to change it to green for the correct 250cc race backgrounds.
Title: Re: Images Thread - 3MA
Post by: theophilos13 on November 29, 2017, 08:16:06 PM
thats my long 3ma project still need a work because it keeps blows head gasket
Title: Re: Images Thread - 3MA
Post by: Ian_B on December 02, 2017, 09:37:48 AM
Long term project too...
Title: Re: Images Thread - 3MA
Post by: Paul on December 02, 2017, 12:36:19 PM
Sold but this was how it finished up

The last pic when still in road form
Title: Re: Images Thread - 3MA
Post by: Russ B on December 08, 2017, 11:05:22 PM
My 3MA just before I put the chain on for its first run "round the block" to make sure it all worked.
It not been used since though....... hence she still looks just as good.lol  Shame on me........

(https://s5.postimg.org/yeaf9x5ev/20150711_123051-1.jpg) (https://postimg.org/image/ist3pytgj/)
Title: Re: Images Thread - 3MA
Post by: morepower on January 10, 2018, 10:37:37 PM
(https://i.imgur.com/agmkJY2.jpg)
(https://i.imgur.com/pTIcLGw.jpg)
(https://i.imgur.com/1oCyNLF.jpg)
(https://i.imgur.com/La4cgEg.jpg)
Title: Re: Images Thread - 3MA
Post by: markhoopy on February 13, 2018, 11:05:39 PM
Apologies for the huge pic but I've been told lots of times that bigger is always better  ;D

(https://farm5.staticflickr.com/4761/39539424414_b216baf56d_h.jpg) (https://flic.kr/p/23eXTm3)

Title: Re: Images Thread - 3MA
Post by: chubba on April 07, 2018, 04:23:17 PM
Almost ready to leave the garage
Title: Re: Images Thread - 3MA
Post by: chubba on April 08, 2018, 04:42:35 PM
Outside
Title: Re: Images Thread - 3MA
Post by: rvt2002 on April 16, 2018, 12:21:59 PM
VJ22 Forks and Wheels?

Sorry, havent seen this post...
My track 3MA... still a work in progress :)
Title: Re: Images Thread - 3MA
Post by: casal-fan on May 02, 2018, 09:30:51 PM
VJ22 Forks and Wheels?

Sorry, havent seen this post...
My track 3MA... still a work in progress :)

Jes, VJ22SP forks. with a harder spring, 0.75 if I remember correctly, and spaced for 4mm less spring preload at minumum preload and 110mm air gap, again, if remember correctly. This is maybe is a bit too little, would like to try 130mm air gap to make more use of 5-7mm more suspension travel. Rear is an R1 unit with a hard spring, dont remember specs. Again, almost no preload on the spring. Front and rear fully adjustable, and its really nice steady chassis.
rgv rear wheel, suzuki 400 3.5" front on racetec rr k1 front and the same racetec rr but in the medium k2 coumpound.
the rgv brake discs scream of rgv... have to find some same size, but neutral to the eye :)
Title: Re: Images Thread - 3MA
Post by: rvt2002 on May 03, 2018, 07:02:55 AM
Ill do this on my 3ma. Might do a 636 forks instead of vj22
Title: Re: Images Thread - 3MA
Post by: SeaR1ck on May 08, 2018, 04:57:45 AM
I saw this on Yahoo jp 3ma mets colors.

Title: Re: Images Thread - 3MA
Post by: ColinS5940 on May 08, 2018, 02:56:15 PM
My little gem