TZR Forum

For Sale / Wanted => Wanted => Topic started by: morepower on January 10, 2018, 10:33:37 PM

Title: 3MA Belly pan hinge wanted...
Post by: morepower on January 10, 2018, 10:33:37 PM
So the 3ma has a small piece of the fairing lower which has broken and one half of the hinge is missing. I want to try and get at least the half with the pin or both sides if possible

Cheers guys....
Title: Re: 3MA Belly pan hinge wanted...
Post by: maccas on January 10, 2018, 11:12:23 PM
I think I can help you. I'll PM you at the weekend.

Dan
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 10, 2018, 11:12:42 PM
I might have them I'll let you know tomorrow unless you get sorted before then
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 11, 2018, 01:10:13 AM
Cheers guys...... Thats ace......
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 11, 2018, 07:03:26 PM
I have 2 female ones and only 1 male which is a bit rough which side did you need
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 11, 2018, 10:10:36 PM
I think its the female side..
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 11, 2018, 10:30:59 PM
I'll clean them up and post a pick tomorrow aft let me know if you need em
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 11, 2018, 10:46:41 PM
I will go and check in the garage later and see which one it is.... It is the most rearward one as there is a bit of fairing missing so I need to sort out a bit of black plastic for them to weld into the broken bit.. I have some old panels from other bikes I can use for that... lol..

Thank you again....
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 11, 2018, 11:44:23 PM
These are old panels so I can chop around the bracket so you can plastic weld it in
Title: Re: 3MA Belly pan hinge wanted...
Post by: maccas on January 12, 2018, 08:09:09 AM
Looks like you are sorted  O0

Dan
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 12, 2018, 03:56:29 PM
This is the rear female one,
Pm me if you need it I can cut as much of the panel as you want
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 12, 2018, 03:57:50 PM
Picture didn't attach sorry
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 12, 2018, 07:58:29 PM
Cheers... Its the male one which is the most rearward one on mine... Bit of a shame but at least I can now get it fixed and it will looks whole again....

(https://i.imgur.com/YGchWvR.jpg)
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on January 12, 2018, 08:02:57 PM
The male one I have is salvageable not sure what Maccas ones are like
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 15, 2018, 12:30:20 AM
Ace... Anyone would do... I may be able to get a copy machined and do both male and female versions. I guess its just the same but has a drilled hole for the pin.

I would be happy with anything.... Message me if you have one and let me know what you want... Cheers guys...
Title: Re: 3MA Belly pan hinge wanted...
Post by: morepower on January 24, 2018, 11:46:33 PM
Thank you...

Sorted now...

Now I just need to get the hinge clean and clear out the crud inside the sleeve on the one fitted to the bike... Then get the new hinge plastic welded into place.

Now its just a pity the battery box hinge has failed due to old age.. But its hidden and I am sure I can fix it in a way the repair is hidden....
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on February 09, 2018, 04:18:29 PM
The rear hinge is different to the front
Title: Re: 3MA Belly pan hinge wanted...
Post by: ColinS5940 on February 10, 2018, 04:19:48 PM
The rear hinge is different to the front
Does the hinge sit in between the fairing edges when they are together or do the fairings butt up to each other?
Thanks
Title: Re: 3MA Belly pan hinge wanted...
Post by: chubba on February 10, 2018, 05:10:57 PM
This is the inside
Title: Re: 3MA Belly pan hinge wanted...
Post by: ColinS5940 on February 10, 2018, 05:18:25 PM
That's ideal, thanks ????
Title: Re: 3MA Belly pan hinge wanted...
Post by: ColinS5940 on March 22, 2018, 12:43:15 AM
For info the genuine part numbers are:
Male hinge rear1KT-2195X-00
Male hinge front 1KT-2194X-00
Female hinge 8V0-2194X-00
Bracket for the rear hinge 1KT-2836G-00

None are available from yam, but they are available from the states for snow mobiles with 80L and 8V0 model prefixes but the same part numbers.
Title: Re: 3MA Belly pan hinge wanted...
Post by: teezer250 on March 22, 2018, 03:14:02 PM
Male hinge rear1KT-2195X-00
here's one on ebay Germany (2 available):
https://www.ebay.co.uk/itm/Yamaha-TZR125-1KT-2195X-00-BRACKET-2-Genuine-NEU-NOS-xn4127/132425779613?hash=item1ed531099d:g:a2gAAOSwXPNaKEbC

Bracket for the rear hinge 1KT-2836G-00
Ebay Germany (7 available):
https://www.ebay.co.uk/itm/Yamaha-1KT-2836G-00-Bracket-Original-NEU-NOS-xs2361/131920028458?hash=item1eb70be32a:g:Ro8AAOSwdzVXwC85

Female hinge 8V0-2194X-00
Ebay USA:
https://www.ebay.co.uk/itm/NOS-YAMAHA-SHROUD-BRACKET-1-EX570-PZ480-PART-8V0-2194X-00/332200113191?epid=1611893303&hash=item4d58ab7427:g:hacAAOSwX61ZBPYi