TZR Forum

General Category => General Discussion => Topic started by: Tzr3ma on May 16, 2018, 06:22:52 PM

Title: Indicator dash light not working
Post by: Tzr3ma on May 16, 2018, 06:22:52 PM
Indicator dash light not working when indicators flashing on right side any ideas
Thanks
Title: Re: Indicator dash light not working
Post by: jcsnook on May 16, 2018, 09:54:11 PM
Bulb in the dash is burnt out?
Title: Re: Indicator dash light not working
Post by: Tzr3ma on May 17, 2018, 08:31:13 AM
Sorry should have put it works fine when left indicator on
Title: Re: Indicator dash light not working
Post by: jcsnook on May 17, 2018, 04:06:02 PM
Have you tried swapping the left/right indicators around to see if the problem moves?  A long shot, but at least you'd rule out the indicator.
Title: Re: Indicator dash light not working
Post by: ColinS5940 on May 17, 2018, 07:00:20 PM
Have you got an led bulb in the dash? If so, it'll only work one way
Title: Re: Indicator dash light not working
Post by: Tzr3ma on May 17, 2018, 09:16:45 PM
Yes I have got a led bulb I will change it
Thanks
Title: Re: Indicator dash light not working
Post by: ColinS5940 on May 17, 2018, 09:24:27 PM
👍
Title: Re: Indicator dash light not working
Post by: tzr-v4 on May 18, 2018, 12:37:50 PM
Typical Yahama turn signal wiring.

When flashing left hand, the current is passing in the indicator one way and when flashing right hand then the current goes the other way in the indicator.

If you want to use led bulb or standard led then you need a diode bridge like this
https://www.taydaelectronics.com/diodes/dbl104g-c1-single-phase-diode-bridge-rectifier-400v-1a-db.html (https://www.taydaelectronics.com/diodes/dbl104g-c1-single-phase-diode-bridge-rectifier-400v-1a-db.html)
Title: Re: Indicator dash light not working
Post by: Tzr3ma on May 21, 2018, 09:48:17 AM
 Thanks