TZR Forum

TZR Specific => 1KT 2MA 2XT 3XC (R1Z) etc Range => Topic started by: claw74 on July 22, 2018, 05:21:34 PM

Title: Tzr 250 rev counts - loose in cover
Post by: claw74 on July 22, 2018, 05:21:34 PM
Hi just change my kph to mph on my Clocks. Ive put everything back the way it should go (I hope) but the rev counter is loose.  Quite a but of movement from side to side. Nuts are tight as they can go underneath.  Speedo is ok.

Have looked on Fowlers parts list and ive got all the bits.



Any ideas?
Title: Re: Tzr 250 rev counts - loose in cover
Post by: claw74 on July 22, 2018, 06:36:21 PM
Sorted, just put dampners on both sides.  No movement. ;D ;D