Author Topic: Yuri's 3xv7 ( 93 3xv sp )  (Read 18164 times)

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #180 on: September 16, 2018, 06:58:34 AM »
No hanging around on this You are a man of action  (-P)
I would be interested in a primary gear as Well if you were getting one made up .
I will look up that balancer shaft thanks . (-P)


I will let you know when i am going to get the gear cut

41juergen

  • Sr. Member
  • ****
  • Location: Hanau, Germany
  • Posts: 390
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #181 on: September 17, 2018, 07:22:28 AM »
Why are you looking for a TZ balancer shaft? If I remember correct the only difference is that the TZ shaft is a bit lighter because the middle part of the shaft was cutted on a lathe.... That can be done easy at a machine shop.

« Last Edit: September 18, 2018, 06:58:36 AM by 41juergen »

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #182 on: September 17, 2018, 09:52:03 AM »
The reason is that the TZ crank has spline gears and normal tzr gears will not fit
So i change the shaft and get everything straight cut gears ... 

vinny

  • Sr. Member
  • ****
  • Location: Ireland
  • Posts: 250
  • Kildare, Ireland
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #183 on: September 17, 2018, 10:02:18 PM »
No hanging around on this You are a man of action  (-P)
I would be interested in a primary gear as Well if you were getting one made up .
I will look up that balancer shaft thanks . (-P)


I will let you know when i am going to get the gear cut
Yes that would be great if you could   (-P)
I have a balancer shaft on the way . ;)

41juergen

  • Sr. Member
  • ****
  • Location: Hanau, Germany
  • Posts: 390
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #184 on: September 18, 2018, 07:00:24 AM »
The reason is that the TZ crank has spline gears and normal tzr gears will not fit
So i change the shaft and get everything straight cut gears ...

But the balancer shaft has the same connection setup for the TZR as well for the TZ gear. So you can mount the TZ gear on a TZR balancer shaft...

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #185 on: September 18, 2018, 11:30:08 PM »
The reason is that the TZ crank has spline gears and normal tzr gears will not fit
So i change the shaft and get everything straight cut gears ...

But the balancer shaft has the same connection setup for the TZR as well for the TZ gear. So you can mount the TZ gear on a TZR balancer shaft...

Here you can see the spline on the tz balance shaft

When i ma back from Mexico i will take better photos

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #186 on: December 02, 2018, 09:26:56 AM »
I got this the other day
Now i only need pistons and custom gear for basket and crank
« Last Edit: December 02, 2018, 09:29:10 AM by Yuri »

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #187 on: January 06, 2019, 03:14:27 PM »
My new forks arrived todat

For the TZR

jcsnook

  • Hero Member
  • *****
  • Location: Tampa Bay, Florida
  • Posts: 1202
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #188 on: January 14, 2019, 04:30:03 PM »
Oh good lord Yuri...those look amazing!  :o   What brakes will you use?
If your not mixing gas, your not hauling ass!

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #189 on: January 14, 2019, 05:20:13 PM »
Oh good lord Yuri...those look amazing!  :o   What brakes will you use?
Thanks
I am saving for a set of brembo GP4-RR

rvt2002

  • Full Member
  • ***
  • Location: Gurnee, Illinois USA
  • Posts: 186
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #190 on: February 13, 2019, 11:33:08 AM »
Ooooooooooooooohlinnsssssss. Bling bling  8) 8) 8) 8)

TZRtim

  • Sr. Member
  • ****
  • Location: Gloucester-UK
  • Posts: 306
  • One day ill own a 3xv ...3ma...
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #191 on: February 13, 2019, 09:08:02 PM »
That's one serious upgrade , very nice indeed  .  iv pondered getting light weight wheels but for 125r - think id struggle to find a manufacturer that would fit . Also if JMC were still in buisness id love to have the std steel braced swingin arm made in ally . Then the steel rear subframe ? Where does one stop ? One day when i have my own proper workshop id try making some of it myself  (-P)
May the wind blow light and your groups shoot tight - UKV...  Biker and shooter for life ...

thump566

  • Full Member
  • ***
  • Location: NW London
  • Posts: 219
  • NW London, UK
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #192 on: February 13, 2019, 09:38:41 PM »
That's one serious upgrade , very nice indeed  .  iv pondered getting light weight wheels but for 125r - think id struggle to find a manufacturer that would fit . Also if JMC were still in buisness id love to have the std steel braced swingin arm made in ally . Then the steel rear subframe ? Where does one stop ? One day when i have my own proper workshop id try making some of it myself  (-P)

Tried Gia in Nottingham? Recall some of the guys moved there when Spondon Engineering closed down (I believe)  :-\
Firing on two....almost.

jools

  • Hero Member
  • *****
  • Location: Ryde, NSW 'Straylia
  • Posts: 2067
  • Yes, we have no Bananas
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #193 on: February 25, 2019, 03:37:58 AM »
Oh good lord Yuri...those look amazing!  :o   What brakes will you use?
Thanks
I am saving for a set of brembo GP4-RR

Are you planning on doing a face plant or something ?? :))
Plus ce la change, plus ce la memchose

Yuri

  • Hero Member
  • *****
  • Location: South Africa
  • Posts: 958
Re: Yuri's 3xv7 ( 93 3xv sp )
« Reply #194 on: February 25, 2019, 08:44:06 PM »
That's one serious upgrade , very nice indeed  .  iv pondered getting light weight wheels but for 125r - think id struggle to find a manufacturer that would fit . Also if JMC were still in buisness id love to have the std steel braced swingin arm made in ally . Then the steel rear subframe ? Where does one stop ? One day when i have my own proper workshop id try making some of it myself  (-P)

Lol that is a good question