Leakdown test kits. 3ma, 2ma and 3xv all available soon

[maccas]

As Gary has mentioned in his thread, i can do a complete kit to seal the carb rubbers and the exhaust port for all varieties of TZR and any other bike you could imagine providing i have the measurements. I've done the ypvs and rgv (sean at the tuning works is trying a kit out for me)

The kits cost £30 including post to the UK.

This is the kit for a ypvs but all other tzr's will be similar.



Dan

[stroker3xv]

WOW nice work Dan

[eyrey1]

they are spot on and easy to use

[Rzmax]

I'm interested in a kit for my 3xvSp. Thanks!

[Paulyb44]

After a set Dan for  my 91 3xv sp
Cheers

[maccas]

I'll pm you separately chaps!

Thanks,

Dan

[EEKNOWS]

I've already got a Motion Pro kit but wouldn't mind those exhaust bungs can I get a few of those various dimensions?

[jcsnook]

Those look nice Dan.  I've already gotten the carb rubber bungs with valves from you, I'm just needing the other bits to complete a kit for the TZR.  Can they be bought separately?  I could also use a kit for the RG400...as I hear they are notorious for leaks.

[maccas]

Lozza,

Certainly, just let me know what you need and we'll sort something out.

Jim,

No problem, I can do the exhaust bungs for you, £13 including post to the US ok?

Dan

[maccas]

Jim,

Would be very keen to do a kit for the rg. I'll try and find somone in the uk to borrow a cylinder and carb rubber from.

Dan

[jcsnook]

Sounds like a deal Dan.  I can wait till you get the RG kit sorted and then everything can ship together.

No carb rubbers on the RG's tho, they bolt to a rotary valve cover, and seal with an o-ring, so all you'd need to make is a plate.  I can send an old carb body over, if you think that would do it.  It may be best if you had the rotary valve cover tho.

[maccas]

Jim,

Well there you go i didn't know that! If you can measure the hole centres for me, hole diameter and maybe the height and width of the face that the carb mounts to i can do them no problem.

I'll get on the rg forum and ask for a barrel to borrow :-)

Dan

[jcsnook]

Well, that's not my motor, but a pic I snagged from Google.  So I'd have to pull a carb to measure my plate.  I have some maintenance to do on the bike this weekend, so I'll see if I can get after that for you.

I did just get some spare barrels and heads in the mail this week from Japan!  Thinking of doing a big bore kit with them. 

[Yuri]

Here are once the will work on the 3yl , 4dp , 4tw and 93/94sp that Dan made me


[URL=http://s248.photobucket.com/user/Yurivd/media/Mobile%20Uploads/322FE550-98BC-490F-AB84-3BE010432C11.jpg.html][/URL]

[maccas]

Do they seal ok Yuri?

Dan