Author Topic: 3xv powervalve  (Read 292 times)

gubbyj

  • Jr. Member
  • **
  • Posts: 25
3xv powervalve
« on: January 30, 2018, 10:31:55 PM »
hi, does anyone know if the powervalve from another tzr model fits the 3xv as mine is in two halfs but supposed to be one piece by the looks of it ,or can they be ali welded ?

thanks.

SeaR1ck

  • Sr. Member
  • ****
  • Location: Seattle
  • Posts: 320
Re: 3xv powervalve
« Reply #1 on: January 31, 2018, 12:01:19 AM »
It should be two pieces held together with two pins that are removable in the centre.

ybk

  • Hero Member
  • *****
  • Location: NZ
  • Posts: 1499
Re: 3xv powervalve
« Reply #2 on: January 31, 2018, 08:22:54 AM »
They are one piece, at least all the ones Iíve come across. The 3ma has the pin?

41juergen

  • Sr. Member
  • ****
  • Location: Hanau, Germany
  • Posts: 327
Re: 3xv powervalve
« Reply #3 on: January 31, 2018, 09:12:55 AM »
Or is it an SP cylinder / power valve? They are also connected via a M6 bolt...

gubbyj

  • Jr. Member
  • **
  • Posts: 25
Re: 3xv powervalve
« Reply #4 on: January 31, 2018, 07:38:01 PM »
thanks for replys guys .it certainly looks like it was one piece and no holes etc for bolts or pins so should be right. can they be ali welded does anyone know.

peterbike

  • Full Member
  • ***
  • Location: melbourne australia
  • Posts: 178
Re: 3xv powervalve
« Reply #5 on: February 01, 2018, 10:38:44 AM »
yes

gubbyj

  • Jr. Member
  • **
  • Posts: 25
Re: 3xv powervalve
« Reply #6 on: February 01, 2018, 07:54:56 PM »
great, thanks everyone