3XV R/RS main centre crank seal - possible order/buy in

[yanw]

Sshhhh! I was going to sell him mine for £15 each to try and get some money back from him for my crank rebuild 

[No.406]

May be worth asking Chris Applebee if he wants some, as he rebuilds a lot of v-twin cranks?

Good point - there may be others who don't frequent the 3XV sub-forum who may be interested.  3MA use the same part #?

[SeaR1ck]

Okay I got confirmation of what the seal looks like i need one small request change and have the spring added around the center hole. Other wise it looks good to go a pic on what they sent me everything looks good just that simple fix of a spring.

[ybk]

Nice! The spring is definitely needed as you said.

Heres somepics from my new oem one for comparison:

[Edd]

Hi Searick

I just spoke to ybk on the phone he says the cost per seal is aprox. 5 dollars. If that is the case I am in for 100 dollars or 20 seals. If the costs goes up because of amounts ordered keep me at 100 dollars. Lots of guys in SA needing them.

Excellent News cant wait for feedback.

Thank You

Edd

[yorkee]

I am in for 5 as well.

Looks like a lot of board member here need the crank seal.  If I get 5, I should be able to sell at least 4 on this forum

[SeaR1ck]

I'm still waiting to hear back from the agent about getting the spring added and then production will start. Maybe I should of asked for more per seal 

[sprockets]

I'm in too!
Let me know when, how many and how much and when production will start and expected delivery.

Cheers

Rob

[SeaR1ck]

Okay here is the finalized pic of the seal with the spring now that it is looking good can get production started.

[Edd]

Hi Guys

Just one question from my side maybe i mist it in earlier posts. The seal is steel reinforced it is not just a rubber seal? If it is steel reinforced i am in just let me know how we pay and final price per seal.

Thanks for your hard work.

Edd

[SeaR1ck]

I will ask the manufacture to make sure don't know if it was orginally or not.

[No.406]

This is what my OEM seal looks like:



Part # 93101-40162.  Clearly has a spring and a metallic foundation.  Numbers printed on the one side are "FAJ7 44 72 5.3 TS B3".  Near as I could make out, anyway 

[Cruising-Blue]

I also have an original spare (93101-40163), same as ybk's, but different to 406's...  Mine, like ybk's definitely has a moulded-in steel reinforcing disc/ring.  Internal diameter of seal 40mm / outer diameter 75mm.  If the new ones are manufactured the same as the one I have, I am interested in joining the list of purchasers.

[SeaR1ck]

The seal is 40x72x5.8 dimensions are correct.

[ybk]

This is what my OEM seal looks like:



Part # 93101-40162.  Clearly has a spring and a metallic foundation.  Numbers printed on the one side are "FAJ7 44 72 5.3 TS B3".  Near as I could make out, anyway 

Are you sure about the part #? That looks like the SP center seal..