Author Topic: Help identify exhaust flange  (Read 500 times)

Crank

  • Hero Member
  • *****
  • Location: JHB - South Africa
  • Posts: 1421
Help identify exhaust flange
« on: March 26, 2018, 12:46:35 PM »
Hey Guys, some help here please.

Does anybody recognise this flange.

Thanks
« Last Edit: March 27, 2018, 04:42:03 PM by Crank »

yanw

  • Hero Member
  • *****
  • Location: Gloucestershire, UK
  • Posts: 835
Re: Help identify exhaust flange (sugo?)
« Reply #1 on: March 26, 2018, 01:38:55 PM »
They are not like the ones I have which are apparently "SP Tadao". One to cross off maybe.

Crank

  • Hero Member
  • *****
  • Location: JHB - South Africa
  • Posts: 1421
Re: Help identify exhaust flange (sugo?)
« Reply #2 on: March 26, 2018, 02:48:25 PM »
They are not like the ones I have which are apparently "SP Tadao". One to cross off maybe.

Thanks Yan  (-P)

Smithy3XVC

  • Jr. Member
  • **
  • Posts: 56
Re: Help identify exhaust flange (sugo?)
« Reply #3 on: March 27, 2018, 11:31:34 AM »
Not Dog Fight Racing either. What model are they for?

Crank

  • Hero Member
  • *****
  • Location: JHB - South Africa
  • Posts: 1421
Re: Help identify exhaust flange (sugo?)
« Reply #4 on: March 27, 2018, 04:41:02 PM »
Thanks Smithy.

Came off a set of pipes I just acquired.
They had been on a 3xv R.
After some research it seems that they are actually a pretty special set of pipes.
These particular pipes were never made for the R so seems somebody made up a set of flanges to adapt to R cylinders.

Problem is there was only one flange with the pipes!
The guy bought the bike with one complete cylinder missing so I'm assuming the other flange was still attached to that.

Will take some good pics of the pipes and post soon.
« Last Edit: March 28, 2018, 06:16:57 AM by Crank »

Crank

  • Hero Member
  • *****
  • Location: JHB - South Africa
  • Posts: 1421
Re: Help identify exhaust flange
« Reply #5 on: March 28, 2018, 08:17:04 PM »
Some pics

maccas

  • Hero Member
  • *****
  • Location: East Yorkshire and Bristol UK
  • Posts: 1716
  • East Yorkshire and Bristol UK
    • GasketGuru
Re: Help identify exhaust flange
« Reply #6 on: March 28, 2018, 08:22:40 PM »
Pipes are 91-92 SP Sugo.

As you say someone must have had the flanges made to fit them to R model cylinders.

Dan

Crank

  • Hero Member
  • *****
  • Location: JHB - South Africa
  • Posts: 1421
Re: Help identify exhaust flange
« Reply #7 on: March 29, 2018, 05:42:41 PM »
Thanks Dan. Any idea if flanges that adapt to R cylinders are available?

yanw

  • Hero Member
  • *****
  • Location: Gloucestershire, UK
  • Posts: 835
Re: Help identify exhaust flange
« Reply #8 on: March 29, 2018, 09:08:47 PM »
I doubt it. I modified a pair of Martin77 flanges that Dan Maccas gave me to fit the SPR pipes I had to the 'R' barrels I have.

Have a look a bit down the page here:
http://pure2strokespirit.net/forums/index.php?topic=1749.75

ybk

  • Hero Member
  • *****
  • Location: NZ
  • Posts: 1549
Re: Help identify exhaust flange
« Reply #9 on: March 29, 2018, 10:29:13 PM »
I'm using 91 sugo's on my 92 SP - I'm using dogfight SP flanges though. The dogfight R type flanges will work on these as well.

Smithy3XVC

  • Jr. Member
  • **
  • Posts: 56
Re: Help identify exhaust flange
« Reply #10 on: March 31, 2018, 01:35:48 AM »
I have Dogfight pipes and flanges on my RSP. They do not fit on R barrels, the angle and hole positions are different.