Author Topic: running on one cylinder  (Read 225 times)

dwells1964

  • Jr. Member
  • **
  • Location: leeds
  • Posts: 5
running on one cylinder
« on: May 14, 2018, 11:20:14 PM »
whilst at Donnington Endurance legends this weekend my 3ma kept going onto one cylinder just after the chicane and on the right hander after the old bridge, was fine when giving it full throttle just bogging down after the bends, seemed to get worse as day went on. Any suggestions

kischde

  • Jr. Member
  • **
  • Location: Switzerland / Germany
  • Posts: 5
Re: running on one cylinder
« Reply #1 on: May 18, 2018, 09:54:53 PM »
while it was running on both, you had "full power" ?
TZR-3MA3 1990
RD-350 YPVS 1WT 1988
TZ-500J 1982
TZR-3MA track bike in progress

dwells1964

  • Jr. Member
  • **
  • Location: leeds
  • Posts: 5
Re: running on one cylinder
« Reply #2 on: May 19, 2018, 08:09:30 AM »
yes it was running

Kev

  • Jr. Member
  • **
  • Location: North Tyneside
  • Posts: 33
Re: running on one cylinder
« Reply #3 on: May 19, 2018, 04:18:46 PM »
Sounds like carburettor pilot jet blockage or emulsion tube blockage,