Author Topic: sprockets  (Read 339 times)

gubbyj

  • Jr. Member
  • **
  • Posts: 25
sprockets
« on: May 15, 2018, 09:27:28 PM »
hi, anyone know what size the standard sprockets are on the 3xv  r model ?

maccas

  • Hero Member
  • *****
  • Location: East Yorkshire and Bristol UK
  • Posts: 1726
  • East Yorkshire and Bristol UK
    • GasketGuru
Re: sprockets
« Reply #1 on: May 15, 2018, 09:47:29 PM »
14 / 37

Dan

gubbyj

  • Jr. Member
  • **
  • Posts: 25
Re: sprockets
« Reply #2 on: May 15, 2018, 09:52:20 PM »
great, thanks for that  :) :)

thump566

  • Full Member
  • ***
  • Location: NW London
  • Posts: 122
  • NW London, UK
Re: sprockets
« Reply #3 on: May 17, 2018, 06:49:52 PM »
Just about to order chain & sprockets for my 3xv R, anyone want to recommend a UK supplier please?
Still firing on two....almost.

teezer250

  • Hero Member
  • *****
  • Location: Manchester,England.
  • Posts: 609
  • 2 x TZR250 1KT's 1986
Re: sprockets
« Reply #4 on: May 17, 2018, 07:05:37 PM »

thump566

  • Full Member
  • ***
  • Location: NW London
  • Posts: 122
  • NW London, UK
Re: sprockets
« Reply #5 on: May 17, 2018, 11:16:09 PM »
Still firing on two....almost.

lumicufi

  • Jr. Member
  • **
  • Location: vigo
  • Posts: 19
  • TZR 250 3xv
Re: sprockets
« Reply #6 on: May 22, 2018, 01:48:52 AM »
What about 13 sproket in front ???

ybk

  • Hero Member
  • *****
  • Location: NZ
  • Posts: 1623
Re: sprockets
« Reply #7 on: May 22, 2018, 03:31:16 AM »
I put 13T on my road bike and track bikes for tracks with shorter straights. Sharpens up the acceleration especially on the road where top end is not an issue.

yanw

  • Hero Member
  • *****
  • Location: Gloucestershire, UK
  • Posts: 876
Re: sprockets
« Reply #8 on: May 22, 2018, 08:08:45 AM »
I run a 13T on my road bike as it tops out at under the ton and hopefully avoids any mandatory driving bans. It makes the bike even more eager :).

lumicufi

  • Jr. Member
  • **
  • Location: vigo
  • Posts: 19
  • TZR 250 3xv
Re: sprockets
« Reply #9 on: May 22, 2018, 08:34:31 PM »
Great !

Hoatso

  • Jr. Member
  • **
  • Location: Maryland, USA
  • Posts: 90
Re: sprockets
« Reply #10 on: May 28, 2018, 04:19:01 AM »
Does anybody make a 3XV rear sprocket in different teeth?  I ended up maybe with a TZ part and had to drill new bolt holes.

yanw

  • Hero Member
  • *****
  • Location: Gloucestershire, UK
  • Posts: 876
Re: sprockets
« Reply #11 on: May 28, 2018, 02:26:43 PM »
From my experience any 3XV rear sprocket is a pain to get hold of and I suspect non-standard will be doubly so.

You can probably get them custom made but the TZ-n-drill option is the cheapest and easiest.