Hi Guys ,
New to forum and a bit of a luddite so bear with me!
Bought my R1z about 6 months ago with no real problems to speak of .Went to Blue Haze Sunday at Ace (great!) and on way home noticed temp gauge in red .Pulled over immediately thinking overheating. Temp gauge returned to normal but when revved shot up to red in time with revving . Engine seemed fine so got going again (foolishly!). Noticed rev counter had died and about 1/4 mile later heard small "pop" and lost all electrical functions (lights, indicators and ypvs servo) . On exam back at home all bulbs had blown and no servo operation plus battery knackered .Wiring seems to be ok but could only find one 20amp fuse near battery tray which was ok . I understand the rec/reg has probably failed causing this and have replaced most bulbs which are now fine running off new battery.However , the servo for ypvs does not "arm" when key turned so has the cdi been "fried" as well?! Not easy to test apparently and only a second hand unit available (£90). Any opinions/advice welcome , Thanks!