Author Topic: V-Force for 2MA?  (Read 1846 times)

41juergen

  • Hero Member
  • ****
  • Location: Hanau, Germany
  • Posts: 593
V-Force for 2MA?
« on: March 22, 2019, 01:26:42 PM »
Hi guys, just wanted to know: is there a V-Force 3 or 4 reed cage available for a 2MA?
cheers
Juergen

loor

  • Full Member
  • **
  • Location: Stuttgart-Germany
  • Posts: 128
Re: V-Force for 2MA?
« Reply #1 on: March 22, 2019, 02:00:18 PM »
Hey J?rgen,

afaik the 3mb and 2ma share the same Reed cage. So: http://www.tzr3ma.com/dyno-results-v-force.html
Maybe some one can verify?!

Best regards and enjoy the sunny weekend.

41juergen

  • Hero Member
  • ****
  • Location: Hanau, Germany
  • Posts: 593
Re: V-Force for 2MA?
« Reply #2 on: March 24, 2019, 11:38:53 AM »
Thank's lorenz, will give it a try (it's for a friends NS400R  ;) )

Martin77

  • Hero Member
  • ****
  • Posts: 641
Re: V-Force for 2MA?
« Reply #3 on: March 25, 2019, 10:29:44 AM »
No v force reeds will bolt straight in, but the 'Blaster' ones are very close needing the mounting holes widening.

I'm not sure they would work in a real 2MA, as the manifolds are very different shapes to the entrance to the reeds.

xracer

  • Full Member
  • **
  • Location: Coleraine : N.Ireland
  • Posts: 159
    • biscuit46@sky.com
Re: V-Force for 2MA?
« Reply #4 on: March 25, 2019, 02:55:37 PM »
Think anything can be "made" to fit if you have the time /money, the Kawasaki guys sometime use this to change from piston port to reed valve