Author Topic: Rebuild of a TZR 125 4FL  (Read 279 times)

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Rebuild of a TZR 125 4FL
« on: November 15, 2020, 07:16:32 PM »
2 year from start to finish
« Last Edit: November 15, 2020, 07:20:24 PM by Need4speed »
4 Strokes are full of parts - 2 strokes are full of speed...

thump566

  • Sr. Member
  • ****
  • Location: NW London
  • Posts: 459
  • NW London, UK
Re: Rebuild of a TZR 125 4FL
« Reply #1 on: November 15, 2020, 09:11:47 PM »
Very nice  (-P) Worth the wait/effort  :)

Like the stands, you could easily get takers for them if you decided to produce a few  (-P)
Always a student attempting to learn from the Mentors.

TZRtim

  • Sr. Member
  • ****
  • Location: Gloucester-UK
  • Posts: 391
  • One day ill own a 3xv ...3ma...
Re: Rebuild of a TZR 125 4FL
« Reply #2 on: November 16, 2020, 12:50:30 AM »
 :) (-P) what a great job you have done , we need more pics especially front end . Are you putting a decal / logo on the tank? One or two things i don't like about the 125r - the std pegs and chain guard. The pegs are stupid heavy. But well done .
May the wind blow light and your groups shoot tight - UKV...  Biker and shooter for life ...

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Re: Rebuild of a TZR 125 4FL
« Reply #3 on: November 16, 2020, 01:27:09 AM »
What part of front end?

The tuningfork logo from the R6 are on its way ...in silver

The rubber foot pegs are needed because of the vibration - on this model the handlebar end weight are extreme heavy for the same reason.
but agree footpegs they look heavy but actually are not.
4 Strokes are full of parts - 2 strokes are full of speed...

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Re: Rebuild of a TZR 125 4FL
« Reply #4 on: November 16, 2020, 06:09:55 PM »
Brake disk TZ 250 pads SBS SP (evo sinter)
Rear end  ;) 3XV
« Last Edit: November 18, 2020, 09:48:31 PM by Need4speed »
4 Strokes are full of parts - 2 strokes are full of speed...

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Re: Rebuild of a TZR 125 4FL
« Reply #5 on: November 16, 2020, 08:34:45 PM »
Front  ;) 3XV
« Last Edit: November 18, 2020, 09:48:08 PM by Need4speed »
4 Strokes are full of parts - 2 strokes are full of speed...

TZRtim

  • Sr. Member
  • ****
  • Location: Gloucester-UK
  • Posts: 391
  • One day ill own a 3xv ...3ma...
Re: Rebuild of a TZR 125 4FL
« Reply #6 on: November 21, 2020, 11:42:26 PM »
Thats it , wasn't sure if it was blank or decals etc - cheers Looks good ..
May the wind blow light and your groups shoot tight - UKV...  Biker and shooter for life ...

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Re: Rebuild of a TZR 125 4FL
« Reply #7 on: November 22, 2020, 06:55:54 PM »
If you want to use a complet 3XV kit on the 4FL you then need:
1. Stel Rear end 3XV
1. Rear mudguard 3XV with light
1. frontlight 3XV
and some patience  ;)
4 Strokes are full of parts - 2 strokes are full of speed...

autoStinger

  • Jr. Member
  • **
  • Location: west midlands
  • Posts: 96
  • i dunno
Re: Rebuild of a TZR 125 4FL
« Reply #8 on: December 01, 2020, 02:30:55 AM »
nice job. i never knew the 4fl used a engine cradle, i think i might add one to my 4dl frame and some extra dampning to the mounts. I  love my 4dl but id rather have your 4fl ;D
rummaging in the rubbish I feel at home

Need4speed

  • Hero Member
  • *****
  • Location: Denmark
  • Posts: 599
    • Yamaha TZR 250 type 3MA projekt
Re: Rebuild of a TZR 125 4FL
« Reply #9 on: December 01, 2020, 04:46:53 PM »
Quote
I  love my 4dl
Me-too   ;) (-P)
4 Strokes are full of parts - 2 strokes are full of speed...