forums.mytzr.com

Does anyone have the tzr and ypvs decals that I can use to make stickers from, they will be greatly appreciated.

Luke

Hi Luke;

Where in SA are you from, I have a guy that made me a complete set of decals in Town. I am getting a set made up next week can mail you some pics and you can decide.

Edd

best is to have them painted on. pro spray guys dont charge a lot either.

Hi Edd,

I am in CT. Could you let me know what he charges you. I need a complete set for a 3ma1 white and red design, the black and grey design has different colour decals. If you wouldn't mind and the price is ok, then could you safely package them and send them to me through standard pastel post. no need to send pics as long as they are standard copies. please let me know asap, because I would like you to order them when you get yours, hopefully it is not to much trouble for you.

Thanks for the offer.

I do signage and printing, its not hard to create the cut file, the biggest problem is getting a decent original to use as a template.

Howzit Ndwedwe

My dad will actually be doing the spray work so stickers will be the best option for me.

my fl's spray job, took hours.




Hi Crank, that's exactly my point, getting an original to copy is the pain in the ass.

Although, I found some decent TZR and Yamaha related vector logos on line a few months ago, just have to find where I saved them!

Hi Crank;

Sorry but I only have the 3ma3 decals grey and black.

Edd

So that's a no go for the decals then Edd?

Yip I do have the two tail piece fairings I can send you some pictures and sticker dimensions?

Edd

the only problem is, it has to be flat so nothing goes out of proportion.

i asked this guy to cut me the red and grey for the black 3MA1 but it was a bit too hard.
but this is what your asking about and a reasonable price too!
http://www.ebay.com/itm/tzr-250-1990-cl ... ts&vxp=mtr

Shot for that, that will save me spraying the whole red and grey design too.

Somehow I didn't see that on ebay?, thanks again Dan

i've just received a set of these decals and they are actually for a TZR250 1KT/2MY red and white version and not for the 3MA1 as it appears to being showing in the tiny picture listed on ebay.
The ad states TZR250 1990 an shows red blocks and silver flashes, so i assumed it was for a 3MA1 red/white/silver version!
sorry to give you bum advise!

Ahh, that sucks. I have ordered a set and they have actually just arrived, I haven checked them out yet.

Hi Dan

Its not as bad as you think. mine are correct accept I am missing the YPVS and yamaha stickers that go on the sides of the grey and at the rear.

Hi again

Dan are you sure you didnt order these mistakenly?

http://www.ebay.com/itm/tzr-250-classic ... 79%26ps%3D

these are the ones I ordered, which are correct. Maybe the ypvs and yamaha on the grey are cut outs and will peel off when putting them on?

http://www.ebay.com/itm/tzr-250-1990-cl ... 79%26ps%3D

If they dont include the YPVS and yamaha on the grey then I'm sorry but we should complain.

Well spotted mate! I actually complained an he gave me a full refunded through PayPal. So i've just mentioned the mix up and said i'll re-order the 1990 classic decals.
I did order the correct decals, he just sent the wrong set!

I have a set of the same seller, it was complete.

A small thing is that its all a bid smaller then original. (Couple off mm not more)

The Quality is good

Hi Louis;

So your set had the YPVS on the red and the big YAMAHA that goes on the grey?

Dan;

that's good to hear. at least you will get the original set now. Would you please do me a favour and ask him about the missing YPVS and YAMAHA on the grey bit .