Not sure if this is right section for this. I have some decals made up and based on oem stuff.
if you need certain sections pm me and i'll see what i have.
May just help folk out looking for a good replacement decal.
thanks
james(snittle)
Do you mind posting some pics of the decals ? Also which color schemes do you have ? :) I'm on the lookout for 3XV nosecone decals..
i can vouch for snittles decals he supplies everyone on the rgv forum !
and all his stuff is top notch !
I would like some japanese stickers - something like the sugo logo . Can you do them ?
Quote from: Neal on September 03, 2012, 09:45:15 PM
I would like some japanese stickers - something like the sugo logo . Can you do them ?
He kindly made some Sugo stickers for me already in two sizes.
Good quality too !
I'll try and get some pics up asap. Happy to create most logos as long as i can find decent pics.
nose cone stickers... not a problem. Have both r/rs and sp styles. All copied form actual panels.
provided you can hang on til after 16th sept... Family hols!!
cheers
snittle
Cool :) You can easily attach the pics to a new post on the 'attachments and other options' links. No need to host them with a picture host. 8)
James,
did you get my PM ?
got a funny PM back with nothing on it...........
Jools
James,
I'm interested to know if you can create some small foil type circular decals to cover up my key scratched ignition switch. I see where Wullie got a slick decal off an eBay seller...a generic Yamaha one, not specific to the TZR...but it really dresses up the dash area without having to spend the money on a new key switch.
I PM'ed Wullie about it, but unfortunately he didn't remember who the seller was. You immediately came to mind 8)
This will give you something to do when you get back from Holiday! ::)
would have thought so. I'll take look at it tomo.
cheers
snittle.
Here's what Wullie bought off eBay...I think it's a generic Yamaha type decal tho.
easy task. Will get in touch. Got a rally car to sticker up for saturday but should be able to get started,
s.
Ya, it's a small enough sticker...easy to duplicate I would hope. 8)
Again, check out your, or another TZR, key switch that's in good condition for all the particulars on the sticker as I think there are "park" or other terms used on it? Mines all bashed to hell from key chains. :-[
I checked mine (93RS) last night and it is the same as the one in the picture above (no park). Now, I am not saying it is the original lock/sticker, just what is on the bike now.
3XVs don't have a parking light... :) Original ignition decals are just 'on', 'off', 'lock'.
quickly drawn out..
Nice!!
Here's a pic of one I found on eBay. Not positive it's the correct part number for the 3XV tho? The book shows 3XV-82501-00
Quote from: Warwick on September 18, 2012, 11:07:30 AM
3XVs don't have a parking light... :) Original ignition decals are just 'on', 'off', 'lock'.
Okay...just a "P" then Professor. ;) Must be for "Pass" :o
I will try to post a "top down" picture of mine tonight to get the angle of the "IGNITION" right. That is if the goal is Concourse.
I wasn't bothered about "Concourse" accuracy, just wanted to tidy up the ign. switch without buying a replacement. The generic one I found on ebay only cost pennies & did the trick. Only 3XV "anoraks" know it's wrong. ;) If Snittle can knock some up though I might replace the replacement. :)
Yan, it would be great if you could let Snittle measure up your genuine 3XV9 RS tank & bodywork over the winter so he could scan / make up graphic sets for '93 model bikes. Not sure about the seat unit panels, but I know that the red "speed block" graphics on the lower fairing panels are painted on, so there shouldn't be too many graphics to make up. Are the black panels on your fairing lowers also painted on or are they "stickers" like the seat units' & top fairing cowls' black "number boards"? Toying with the idea of restoring my bike to its rightful colour scheme. ;)
Who wants an ignition switch in any case? Just dead weight... ;D. And in view of the fact that there are only two wires going to it, it's not like it's a theft deterrent... Toss it in the bin marked 'excess weight'
And if I see the C word again, I'll be coming round with a can of matt black in the dead of night... ;D
Concourse, Concourse, Concourse. :P ;D Enjoy the drive up to Fife. ;)
;D :P
I was toying with the idea of doing the "C" word but realised I am no way OCD enough. It was when I took the bike to http://www.devilsride.com/ (http://www.devilsride.com/) to talk about respraying the tank he told me it had been resprayed before in not quite the right white, about how they had masked out the lettering and how he could take out the very slight dent in the tank. I had missed all of this.
I am happy to let Snittle trace up the bike so he can make 93RS decals. The bottom fairings look like stickers, like all the seat unit ones and the top fairing number board. I can trace them out or if James is near Gloucester I can meet up with him.
My mate used to have a TS185 rat bike. It never got washed but used to get a fresh tin of matt black spray paint each spring. It was a total dog but loads of fun.
Pretty much have all that artwork.. Just trying to make both numberboards (front and rear) a good match, Got the shape spot on but fitting will be a pig!! Front speedblocks as mentioned are sprayed on but i did borrow some sp panels of gecko racing sometime back and they are stickers.. depends on the 'c' bit, i can make them look oem.. Saves doing another colour - but then again you may be spraying top side of tank red anyway,,, either way i can supply as a spray mask (for 'c') or as a decal (non 'c')
got the racing sport lettering/tzr sorted - all sizes spot on. Colour match is pretty good too, only a slight difference on the graphite lower section. Only other issue is the silky white,, Found an off white which looks pretty good. Depends on the customer really.
I'm based in chesterfield so glous is some time away - shame as i've just driven back up from cornwall..
Ignition switch - was running short on time - ignition does need lining up properly to be exactamondo! More time required, If i had a top view photo that would help
snittle.
PM me with what you need me to do and I will do it. I don't really want one myself but I am happy to help the community.
think i'm blind..... photo!! the one i had was as scratched to hell... thanks
i'll pm you if i get in a pickle.
thanks
snittle
Quote from: snittle on September 18, 2012, 09:15:51 PM
Pretty much have all that artwork.. Just trying to make both numberboards (front and rear) a good match, Got the shape spot on but fitting will be a pig!! Front speedblocks as mentioned are sprayed on but i did borrow some sp panels of gecko racing sometime back and they are stickers.. depends on the 'c' bit, i can make them look oem.. Saves doing another colour - but then again you may be spraying top side of tank red anyway,,, either way i can supply as a spray mask (for 'c') or as a decal (non 'c')
got the racing sport lettering/tzr sorted - all sizes spot on. Colour match is pretty good too, only a slight difference on the graphite lower section.
Only other issue is the silky white,, Found an off white which looks pretty good. Depends on the customer really......
Snittle, in 1993 Yamaha changed from "Silky white" to "Bluish white cocktail". The red shade stayed the same though. Hope this helps.
Can you please confirm that you have ( nearly ? ) completed a graphics set for '93 model 3XV's. If so, how much will it be for a set ?
Cheers, Wullie. :)
Any updates on the ignition switch decal or the 3XV RS decal set yet snittle? Just curious...no hurry!
JC
Any updates on this snittle? I'm interested in a full decal kit for a 3xv5. Have you done this model yet or plan on doing one in the future? I'm interested in an ignition switch decal as well.
Thanks,
Max
hi max
3xv5 kit is done now. Had to rework the front decals -- thanks to maccas for panel loan!!
ignition sticker also complete.
James, I still want an ignition sticker (or 2) as well as some of those cool windscreen decals...and maybe even a TZR t-shirt if you still have some, or are still making them?
Quote from: snittle on March 25, 2013, 09:11:08 PM
hi max
3xv5 kit is done now. Had to rework the front decals -- thanks to maccas for panel loan!!
ignition sticker also complete.
No problem James! Glad i could help out! Hope they were upto the job!
Dan
Hi,
I am looking for a set of fairing decals for a 1990 3MA,that go with a silky white paintwork. Does it include the Yamaha decal on the front of the nosecone?.
how much would these be and shipping to Ayrshire.