Text only | Text with Images

TZR Forum

General Category => General Discussion => Topic started by: Neal on September 25, 2012, 01:07:30 PM

Title: TZR300 ?
Post by: Neal on September 25, 2012, 01:07:30 PM
Hi guys ,

I am trying to research some info on the TZR300 conversion for a 3xv motor .
What is the difference between a TZM150 and a TZR150 ?
Which is the correct barrel to use ?
Has anyone done this conversion ?
Title: Re: TZR300 ?
Post by: Paul on September 25, 2012, 03:40:04 PM
That's a brave project Neal.
I recall someone trying DT200 barrels but think it was on a 3MA.
Title: Re: TZR300 ?
Post by: Neal on September 25, 2012, 06:25:39 PM
 8)
Title: Re: TZR300 ?
Post by: jcsnook on September 25, 2012, 06:28:55 PM
I recall seeing a 300cc big bore type conversion "kit" for sale for the TZR 3XV's, I think on eBay?  That was some time ago though, and as I recall...expensive  ::)
Title: Re: TZR300 ?
Post by: Yatsushiro on September 25, 2012, 08:00:46 PM
TZM150 Barrel:

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fwww.twostrokeshop.com%2FP5270163.jpg&hash=093a300f2a48888f0abd384fed61defb5f6a10d1)

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fwww.twostrokeshop.com%2FTZM150_cyl_base_dim.jpg&hash=222779dc14e4e55aaaebb2323eb8ed012469edc8)

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fwww.twostrokeshop.com%2FP5270166.jpg&hash=72a79f042d278f85691b94b754181a89233b26cb)

Still looking for TZR150 info
Title: Re: TZR300 ?
Post by: maccas on September 25, 2012, 08:37:56 PM
Sadly its not even close to 3xv fitment  :-[

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi189.photobucket.com%2Falbums%2Fz125%2Fmaccas125%2FP1000606.jpg&hash=4587e5e13936dd2f4b522b976fc88ab0c41f0ce6)

Dan
Title: Re: TZR300 ?
Post by: Neal on September 25, 2012, 09:04:22 PM
Thanks for the replies , the only bigbore kits that I see are the HH kits made for the TZ but they are super expensive .

Anyone know what the difference is between a TZM and a TZR ? 
Title: Re: TZR300 ?
Post by: tzr-v4 on September 25, 2012, 09:53:41 PM
TZR150 looks more like the TZR125 2RH
VIN is 3RR

http://www.weekendhobby.com/thai2market/Question.asp?ID=613&group=motorcyc (http://www.weekendhobby.com/thai2market/Question.asp?ID=613&group=motorcyc)

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fwww.weekendhobby.com%2Fthai2market%2Fpicture2009%255C19112552172140.JPG&hash=58ae59461c832c57648c5164d0c97e133d1b0d65)

(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fattachments.motorfans.com.cn%2F2012%2F06%2F03%2FZwJNF4HUG6154.jpg&hash=d54a0613457dac8a1f45accc209c2bcbcfa33721)
Title: Re: TZR300 ?
Post by: Neal on September 27, 2012, 08:53:35 PM
Is there any chance that this stud pattern may fit the 3xv ?
Title: Re: TZR300 ?
Post by: Neal on September 27, 2012, 09:39:42 PM
Does anyone have specs on the tzr 4dl barrel ? IE can it fit onto a 3xv casing ?
Title: Re: TZR300 ?
Post by: maccas on September 27, 2012, 10:03:58 PM
I doubt the tzr150 barrel will fit neal. Or the 4dl barrel for that matter.

Are you looking for replacement cylinders or an option to get bored out to a bigger size?

Dan
Title: Re: TZR300 ?
Post by: Neal on September 28, 2012, 07:18:24 AM
I am just thinking about trying to build a 300 motor with other barrels like the conversion for the NSR .
I could do the TZ option to get max power but was just wondering if there was another option .

I wonder if those barrels will fit any other model ?
Title: Re: TZR300 ?
Post by: mboddy on September 28, 2012, 02:57:00 PM
TZ360 ?
http://2stroker.createforumhosting.com/roll-yamaha-tz-360-ig-konigsklasse-t4935.html (http://2stroker.createforumhosting.com/roll-yamaha-tz-360-ig-konigsklasse-t4935.html)
Text only | Text with Images