TZR Forum

For Sale / Wanted => For Sale => Topic started by: Tom Mac on February 07, 2013, 10:15:05 AM

Title: 2MA/1KT swinging arm and other bits that fit
Post by: Tom Mac on February 07, 2013, 10:15:05 AM
TZR 1KT/2MA swinging arm (early type to suit eye to eye shock) - with chain adjusters, end plates, wheel spindle and linkage (was fitted to a TDR so linkage may have been modded) - SOLD
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale026_zpsf0a2fee1.jpg&hash=69ace1e2d0d9c143d5260399357dc517c929fe4c)

Blue spot caliper (direct replacment for standard 4 pot caliper) - Sold
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale030_zpsf33c6baa.jpg&hash=839b8cbfb4ecd38e645c8ef8a08fdc8214134721)
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale031_zpsa9ed7bb5.jpg&hash=f831f1cae42fb4e8537d8fa3781044a927f6998a)
the braided hose is only fit for the bin so not included.

Also got a pair of Brembo wheels fitted with Bridgestone BT090 tyres. front is a 2.75" x 17" from a Cagiva Mito and the rear is a 4.0 x 17" also from a Cagiva. Spoke pattern match. Rear has disc and sprocket and carrier (sprocket carrier has a chunk broken off it though) was fitted in the TZR swinging arm above, front has speedo drive and spacers to suit fitment in a TDR250.
= Tyres now sold, offer invited for the wheels.
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale041_zpsff6dd367.jpg&hash=d08bf99dd3191bfa7183141f69695f61eaf91fab)
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale043_zpsd1eadbf6.jpg&hash=9027a0d484ca2bad62a9cb0967b8de80833274c4)
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale044_zpsa1656235.jpg&hash=d82f50f0575768a68a7fa8f08d51640a5684e893)

Wavey disc - £50
(https://pure2strokespirit.net/forums/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy192%2FSFSR%2Febay%2520stuff%2Ftdrbitsforsale034_zpsc0165457.jpg&hash=ab937eab4262bb3ee3059e04441bd7eb35e94d93)

collection preferred but can post at cost.
Title: Re: 2MA/1KT swinging arm and other bits that fit
Post by: teezer250 on February 10, 2013, 02:31:29 PM
Hi Tom,
Are you at the Bristol classic bike show as i could pick up the swingarm from there as i am there for the whole weekend ?

I've also sent you the same message on ebay as i looked there first before here.

Regards,Phil.
Title: Re: 2MA/1KT swinging arm and other bits that fit
Post by: The Moosehunter on February 10, 2013, 10:55:17 PM
I'm after one off a chain adjuster plate so if theres any chance these are up for graps that would be great

Cheers
Title: Re: 2MA/1KT swinging arm and other bits that fit
Post by: Tom Mac on February 16, 2013, 06:28:14 PM
Sorry for not replying sooner guys, I forgot i'd posted these on here as well.

Phil - sorry you were outbid, enjoy the show.

Moosehunter - I don't have a spare chain adjuster plate, sorry.

still got the wheels and the wavey disc, if any one is interested its probably best to send me a PM.

cheers
Tom