TZR Forum

For Sale / Wanted => For Sale => Topic started by: Luke 3MA on April 28, 2013, 11:32:38 AM

Title: 3MA parts for sale
Post by: Luke 3MA on April 28, 2013, 11:32:38 AM
I have a few unused parts that I would like to sell. please pm me with offers, I will add more to the list as time goes by. if you desperately need a part then send me a message and I will have a look if I have the part you are looking for. I am in SA.

3MA1 yoke set (Immaculate condition): R700

(https://lh5.googleusercontent.com/--iNzODX4mZE/UXzpCPvGpPI/AAAAAAAAAaU/bTffBtjPlpc/w902-h677/WP_000786.jpg)

(https://lh3.googleusercontent.com/-SMTYOJpjzoc/UXzpL94woLI/AAAAAAAAAac/OV0JXrX6HXE/w548-h731/WP_000787.jpg)

(https://lh6.googleusercontent.com/-Jyspmw9dxCc/UXzpTKo8DUI/AAAAAAAAAak/oKzqgn4d5gc/w548-h731/WP_000788.jpg)

(https://lh3.googleusercontent.com/-ffho0XpKo_E/UXzpaSwLGOI/AAAAAAAAAas/BI0gsrCTJN0/w902-h677/WP_000789.jpg)



3MA1 handle bars (Immaculate condition): R300

(https://lh3.googleusercontent.com/-biw72S58aE0/UXzphFH-AzI/AAAAAAAAAa0/hVttOkxyHsk/w902-h677/WP_000790.jpg)

Title: Re: 3MA parts for sale
Post by: Luke 3MA on May 07, 2013, 12:43:27 PM
3ma3 cdi (excellent condition)

(https://lh4.googleusercontent.com/-phqJ09PVTfc/UYjXpprBbMI/AAAAAAAAAbk/C7aaQnTwrzk/w902-h677-no/WP_000799.jpg)

3ma-11 (has a chip out of the one side but is still in tact and as far as I know working well) R200

(https://lh5.googleusercontent.com/-1LpylrxztgI/UYjXszwvj3I/AAAAAAAAAbs/VVJcImWeldI/w902-h677-no/WP_000800.jpg)
Title: Re: 3MA parts for sale
Post by: Edd on May 08, 2013, 11:16:14 AM
Hi Luke;

You have any spare barrels.

Edd
Title: Re: 3MA parts for sale
Post by: Luke 3MA on May 08, 2013, 12:35:11 PM
Hi Edd

I have a scored 3ma-00 LH barrel. would need to be replated. fairly similar to the other barrels I sent you.

Luke
Title: Re: 3MA parts for sale
Post by: Edd on May 09, 2013, 06:48:06 AM
Will let you know I just need to check which one I have hopefully it is the rhs
Title: Re: 3MA parts for sale
Post by: Edd on May 17, 2013, 08:22:07 AM
Hi Luke;

Shit out of luck I also have a LHS barrel. :'(

Edd
Title: Re: 3MA parts for sale
Post by: Luke 3MA on May 17, 2013, 12:59:54 PM
ahh. all right. sorry about that Edd

Luke
Title: Re: 3MA parts for sale
Post by: Edd on June 08, 2013, 04:25:36 AM
Hi Luke

How much for the Barrel

Edd
Title: Re: 3MA parts for sale
Post by: Luke 3MA on June 08, 2013, 11:43:42 AM
Hi Edd;

how does R300-R400 sound? I dont know how much a scored barrel goes for?

Luke
Title: Re: 3MA parts for sale
Post by: Luke 3MA on June 08, 2013, 12:58:59 PM
rear wheel hub rubbers (one of the connecting rubbers is broken as seen in the pic but it is still usable) R100

(https://lh3.googleusercontent.com/-3Y764yUicoQ/UbMIICrrHyI/AAAAAAAAAc4/PLWjxpBrlfA/w958-h719-no/WP_000869.jpg)


left handle bar switches (fair condition) R100

(https://lh3.googleusercontent.com/-0fAHMMh9_B0/UbMINp0BHvI/AAAAAAAAAdA/y34CxQtS0ts/w958-h719-no/WP_000868.jpg)


right handle bar switches and throttle (fair condition) R150

(https://lh4.googleusercontent.com/-Bsze9g4fnE4/UbMIYA4QoMI/AAAAAAAAAdQ/WmcTDRQZB7Q/w958-h719-no/WP_000865.jpg)


this thing :) (good condition) R100

(https://lh5.googleusercontent.com/-mpnrMnLMrEI/UbMIgt79hPI/AAAAAAAAAdY/1W6FfEj3Viw/w958-h719-no/WP_000864.jpg)


kick stand (good condition) R200

(https://lh3.googleusercontent.com/-x6nw39X4RA0/UbMImR-Qm7I/AAAAAAAAAdg/9ywTFZDtjoY/w958-h719-no/WP_000862.jpg)

(https://lh6.googleusercontent.com/-QpW4vsfYxzo/UbMIqp8aYWI/AAAAAAAAAdo/ua-EW3T7Vbw/w958-h719-no/WP_000861.jpg)


rubber chain protector (good condition, has been used) R100

(https://lh3.googleusercontent.com/-EPL5YhtjTVg/UbMIvPTlO_I/AAAAAAAAAdw/NJj2OWOqfTw/w958-h719-no/WP_000858.jpg)


kick starter (great condition) R150

(https://lh5.googleusercontent.com/-nxnuJ9gMzrI/UbMIy-yAI2I/AAAAAAAAAd4/pEqJNurZW58/w958-h719-no/WP_000857.jpg)


break light (great condition) R200

(https://lh3.googleusercontent.com/-LEr9PEUWuEM/UbMI3Yze1TI/AAAAAAAAAeA/5UODrUCOHhs/w958-h719-no/WP_000856.jpg)


rear wheel hub (great condition, sprocket needs to be replaced) R200

(https://lh4.googleusercontent.com/-61JVA4HC8zQ/UbMI8L6Wg3I/AAAAAAAAAeI/nSRGJCg9yMs/w958-h719-no/WP_000855.jpg)

(https://lh4.googleusercontent.com/-qOAPTHGM0hk/UbMJASWvBQI/AAAAAAAAAeQ/mNfK5geSt-E/w958-h719-no/WP_000854.jpg)
Title: Re: 3MA parts for sale
Post by: 4l04ever on June 09, 2013, 04:50:06 PM
Can you post to UK?   I am interested in the kick start and front mudguard...

Thanks
Title: Re: 3MA parts for sale
Post by: Luke 3MA on June 09, 2013, 06:57:03 PM
Yes I can. I Can find out a shipping price if you Like?

Luke
Title: Re: 3MA parts for sale
Post by: 4l04ever on June 09, 2013, 09:49:51 PM
Yes if you can.

Thanks
Title: Re: 3MA parts for sale
Post by: Luke 3MA on June 10, 2013, 09:56:14 AM
Hi,

Air mail is R371 and it will take 7-8 days

shipping is R47 and it will take 6-8 weeks.

I dont know how soon you need the parts?

Luke
Title: Re: 3MA parts for sale
Post by: 4l04ever on June 13, 2013, 12:24:32 PM
Thanks for getting back to me.  Will let you know next week.    Do you take paypal payment?
Title: Re: 3MA parts for sale
Post by: Luke 3MA on June 13, 2013, 03:16:10 PM
I have never received a payment through pay pal but I have an account which is all you need to send it right? or EFT is fine too.

Luke
Title: Re: 3MA parts for sale
Post by: 4l04ever on June 14, 2013, 12:48:41 PM
Paypal is the easy way for us UK peeps :-)   
Title: Re: 3MA parts for sale
Post by: markhoopy on June 19, 2013, 01:03:57 AM
Just remember to send the money as a gift to avoid their horrendous fees!