Text only | Text with Images

TZR Forum

TZR Specific => TZR125's => Topic started by: matoo87 on September 20, 2024, 01:08:04 PM

Title: CDI and YPVS Zeetronic controller for TZR 125 2RH
Post by: matoo87 on September 20, 2024, 01:08:04 PM
Hello! Here again with another question. Can someone confirm for me if Zeetronic, specifically the PCDI 10VT model, can work on the TZR 125 2RH? Thanks.
Title: Re: CDI and YPVS Zeetronic controller for TZR 125 2RH
Post by: tzr-v4 on September 20, 2024, 02:33:08 PM
Yes PCDI- ones are the suitable ones.
Theses are not using the battery power to charge the capacitor in the ignition module.

PDCI- models uses the battery.

I know the product names are a bit confusing  ::)

https://www.zeeltronic.com/page/pcdi-10v.php (https://www.zeeltronic.com/page/pcdi-10v.php)

Compare 2RH vs 4DL wiring loom and you'll know.
- 5 wires YPVS
- 2 coils from stator (4 wires)
   - 1 pickup coil
   - 1 capacitor charging coil

TZR125 4DL wiring diagram
https://www.zeeltronic.com/manuals/PCDI-10VT_TZR125-4DL_PV-mod_WIRING.pdf (https://www.zeeltronic.com/manuals/PCDI-10VT_TZR125-4DL_PV-mod_WIRING.pdf)

Ask Borut to confirm.

For me 100% suitable.
Title: Re: CDI and YPVS Zeetronic controller for TZR 125 2RH
Post by: matoo87 on September 20, 2024, 06:42:07 PM
Thank you very much again!
Text only | Text with Images