Hello from Japan!

[Webike Japan]

Hi everyone,
This is Webike Japan.

We're a Japan-based motorcycle parts retailer, and first and foremost, we're riders ourselves. We're here because we genuinely enjoy motorcycles and the communities built around them.

For forum members, we hope to offer some exclusive perks from time to time, such as special coupon codes or group-buy opportunities — only when it makes sense and adds value for you.

If you ever have technical questions about fitment or performance, we'll do our best to help. Our engineers in Japan can provide insights directly from the source, and we're happy to share that knowledge when it's useful.

We'll also occasionally post new product information, especially when something interesting or relevant becomes available.

We fully respect this forum and its rules. We won't spam, and we'll strictly follow all vendor guidelines. If any verification or documentation is needed, we're more than happy to provide it.

Most importantly, we hope to contribute in a positive way — answering questions, sharing information, and supporting fellow riders.

Thanks for having us, and we look forward to being part of the community.

Best regards,
Webike Japan

[ybk]

@Webike Japan All good! You're welcome to post any relevant product information. Perks and coupons are also welcome. I often order OEM parts from Webike and I'm sure many forum members as well. 

It would be great if Webike does the 10% off OEM parts again, it makes a difference!

[SeaR1ck]

I have a question about a product

The Keyster carb rebuild kits

Where are they made? Japan?

How close to accurate are they to oem parts, are the provided jets and needles in the kits?

Do the needles they make follow the exact dimensions as stock?

I have bought quite a few oem items and more from webike.

[JKV45]

Welcome!

Glad to see you made it over here.

Saw you on the Ninja forum.

One question - is there a good rear cowl for the TZR 3XV available?

I bought one that came out of Japan, but it was Chinese, and was not very good.

Thanks!

[Webike Japan]

I have a question about a product

The Keyster carb rebuild kits

Where are they made? Japan?

How close to accurate are they to oem parts, are the provided jets and needles in the kits?

Do the needles they make follow the exact dimensions as stock?

I have bought quite a few oem items and more from webike.

All Keyster products are manufactured in Japan.

Basically, if you purchase a kit that matches your vehicle, you can achieve the same effect as with genuine parts.

The kit typically includes a needle and various jets, with 3 to 4 jets of different sizes included.

[Webike Japan]

Welcome!

Glad to see you made it over here.

Saw you on the Ninja forum.

One question - is there a good rear cowl for the TZR 3XV available?

I bought one that came out of Japan, but it was Chinese, and was not very good.

Thanks!

Finding parts with the exact same shape as the original is difficult, but we do have some in stock.

Some products require a seat modification, but they are made by manufacturers that also race in Japan, so their performance is guaranteed.

If you absolutely want the exact same shape as the original and don't mind used parts, we also have original rear cowls from that era.
https://japan.webike.net/ps/#!p.m=13571&p.c=1112&p.sk=1

[JKV45]

Finding parts with the exact same shape as the original is difficult, but we do have some in stock.

Some products require a seat modification, but they are made by manufacturers that also race in Japan, so their performance is guaranteed.

If you absolutely want the exact same shape as the original and don't mind used parts, we also have original rear cowls from that era.
https://japan.webike.net/ps/#!p.m=13571&p.c=1112&p.sk=1

Thanks.

I'm looking for the type of cowl that replaces the passenger seat, rather than a full single-seat tail section.

I didn't see any of that type listed.