f3 kit 2ma barrels

[Rik]

Does anyone know the port heights of the f3 fit barrels?

I found a page years ago with that info on it but my pc died so don't have it now and can't find it on the interweb...

[jools]

There is a download here for the F3 manual:

http://www.pure-2-stroke-spirit.info/filebrowser/2MA

it may show what you are after

[tzr-v4]

You could found a better porting than the old F3 spec.
Later 2 strokes knowledge should be better.

Check pitlane forum (maybe some post in French and other in English).

[Rik]

Thanks guys. Re the f3 manual I have that but the port heights etc aren't in there.

Checked pit lane nothing there but thanks anyway.

[tzr-v4]

No thing directly telling you what to do on the TZR250 but what should be done as what was done on modern racing 2 strokes.

Part One
http://www.pit-lane.biz/t117-gp125-all-that-you-wanted-to-know-on-aprilia-rsa-125-and-more-by-mr-jan-thiel-and-mr-frits-overmars-part-1-locked
Part Two
http://www.pit-lane.biz/t3173-gp125-all-that-you-wanted-to-know-on-aprilia-rsa-125-and-more-by-mr-jan-thiel-and-mr-frits-overmars-part-2
Part Three
http://www.pit-lane.biz/t4072-gp125-all-that-you-wanted-to-know-on-aprilia-rsa-125-and-more-by-mr-jan-thiel-and-mr-frits-overmars-part-3

[Rik]

Thanks for the links.

Lots of info from the masters of 2 stroke technology! A rare find.

I'll have to put some time aside to read that lot fully

Cheers