2MA/1KT swinging arm and other bits that fit

[Tom Mac]

TZR 1KT/2MA swinging arm (early type to suit eye to eye shock) - with chain adjusters, end plates, wheel spindle and linkage (was fitted to a TDR so linkage may have been modded) - SOLD


Blue spot caliper (direct replacment for standard 4 pot caliper) - Sold


the braided hose is only fit for the bin so not included.

Also got a pair of Brembo wheels fitted with Bridgestone BT090 tyres. front is a 2.75" x 17" from a Cagiva Mito and the rear is a 4.0 x 17" also from a Cagiva. Spoke pattern match. Rear has disc and sprocket and carrier (sprocket carrier has a chunk broken off it though) was fitted in the TZR swinging arm above, front has speedo drive and spacers to suit fitment in a TDR250.
= Tyres now sold, offer invited for the wheels.




Wavey disc - £50


collection preferred but can post at cost.

[teezer250]

Hi Tom,
Are you at the Bristol classic bike show as i could pick up the swingarm from there as i am there for the whole weekend ?

I've also sent you the same message on ebay as i looked there first before here.

Regards,Phil.

[The Moosehunter]

I'm after one off a chain adjuster plate so if theres any chance these are up for graps that would be great

Cheers

[Tom Mac]

Sorry for not replying sooner guys, I forgot i'd posted these on here as well.

Phil - sorry you were outbid, enjoy the show.

Moosehunter - I don't have a spare chain adjuster plate, sorry.

still got the wheels and the wavey disc, if any one is interested its probably best to send me a PM.

cheers
Tom