1KT f3 fairing

[RC45]

So here it is. Fit the sidefairings perfectly! I think it is really pretty

Where did you find the F3 upper?  Any interest in getting is duplicated?

[TZR1ktF3]

Hi buddy, trying to get it copied. Got really lucky and found a new unused kit item

[gibba1008]

Top fairing is nice. And the instrument bracket. Where to get them?
I have been eyeing this seat from Poly26:

http://www.poly26.com/carenage-moto-tuning-yamaha-250-tzr-1988-1991_5-115.html

I have tried ordering this seat for my f3 project but its an answer phone and don't speak French and have no clue what's being said!! Is there anywhere else around the world that sell it and speak our lingo?

[James P]

Just saw this NOS "Clever Wolf" fairing kit on Yahoo (http://page9.auctions.yahoo.co.jp/jp/auction/k206971738) - it looks like the F3 fairing, but difficult to confirm 100% without seeing it assembled on a bike!

Regards,
James

[TZR1ktF3]

I may have the shape of the f3 unit, but underneath that flap isnt f3. Still really nice fairing bet the lines follow the kit. Nice with all brackets and cheap

[jools]

Just saw this NOS "Clever Wolf" fairing kit on Yahoo (http://page9.auctions.yahoo.co.jp/jp/auction/k206971738) - it looks like the F3 fairing, but difficult to confirm 100% without seeing it assembled on a bike!

Regards,
James

That does look nice - are you bidding on it James ?

[James P]

That does look nice - are you bidding on it James ?

No Jools - I'm trying to give up my "buying-cheapish-parts-on-Yahoo" addiction! I would much like to build a road-going F3 replica, but I'm not sure I can justify the cost . All of my other projects are keeping me busy too. If you or any other forum member buys this fairing, I'd certainly be interested to see how it looks fitted to a bike.

Regards,
James

[mboddy]

It looks good. Pity I spent my dollars on a 2XT last week.
Seppo's F3 fairing looks very good. It is the best I have seen.

[Mick]

Top fairing is nice. And the instrument bracket. Where to get them?
I have been eyeing this seat from Poly26:

http://www.poly26.com/carenage-moto-tuning-yamaha-250-tzr-1988-1991_5-115.html

I have tried ordering this seat for my f3 project but its an answer phone and don't speak French and have no clue what's being said!! Is there anywhere else around the world that sell it and speak our lingo?

They have dealers throughout Europe..

http://www.poly26.com/export.php?poly26=b028c81badbfa5271273b2cc1c09f147

[gibba1008]

Thanks Mick, saw your reply a bit late and have a fellow member living in France getting mine now, but will in future use this info so thanks for posting.

[Eric_TZR_TDR]

So got your seat ? Curious about quality and fit.
I tried the Dutch dealer. He stopped because the demand was too low.
His advice: call them or send a fax... They don't reply email. Fax ?! In what century do they live over there 
Without Google translate my French is zero. Gonna think up a plan

[tzr-v4]

Thanks Mick, saw your reply a bit late and have a fellow member living in France getting mine now, but will in future use this info so thanks for posting.

I'm the one who speaks French 

This what have been ordered... 132€ posted to UK from memory

[Eric_TZR_TDR]

Looks very nice !!
Today ordered the Yamaha TZ250S-T 1986-1987 seat by Mead Speed for the circuit.
Looks almost the same as F3 seat exept for the plastic covering the petrol tank.
Still like the Poly26 mono seat for the street with Japanese tail light and blinkers.
Maybe later   

[gibba1008]

hi Eric, the seat that Olivier ordered is a very good fit, it will however need reinforcing a little at the mounting points and under the seat as the fibreglass is much thinner than what the likes of meadspeed supply.

[Eric_TZR_TDR]

No response from Poly26. But Alain Rofidal uses email and responds to an English mail

So ordered a mono-seat for 115 euro's and 16,50 euro for delivery in the Netherlands.
http://rofidal.polyester.free.fr/Galerie/Yamaha/250-TZR/index.php?action=popup&nf=SELLE%20MONOPLACE%20%20250%20TZR.jpg&ls=1366&hs=728

I hope both seats will fit easily on the sugo F3 Mounts. Keep you posted.