Keleytis 3MA track bike wannabe

[KeLeYTiS]

Hi guys
Bought this 3MA for over a year ago

Its a 3MA-00 with swapped engine from a 3MA-10 ,it also came with a few spares

It was not used for 5 years and before that i dont think its life was pretty easy

So here are some photos of its condition,found a 240kmh speedo on it and a MMax derestrictor

[KeLeYTiS]

I will use some fiber glass on the track ,not the original fairings so a set  of CBR600 I got for free is the way to go ,

My personal opinion since 2005 that i built the streetfighter 3MA is that the exhaust of the 3MA are the most beautiful from all of the other 2strokes put together so i want not to be hidden

Here are some tests

[KeLeYTiS]

I havent done much to the chassis yet
Thinking of different rear end with a 17" wheel ,different tank maybe a handmade one etc.

I started to put the 2 engines i have into pieces so i could see which parts i could salvage

Unfortunately one of these has a smashed lower bearing causing bad pistons,cylinders and crank rod
The other one 3MA-10 is in good condition (at least the cylinders are good)

[KeLeYTiS]

Some differences i found between 3MA-10 and 3MA-00

[KeLeYTiS]

And some bad stuff I found or made during the whole process

[KeLeYTiS]

Martin made some pipes for me all the need is welding but thats another sad story

They look awesome i hope they work as good as they look

[KeLeYTiS]

Now i got the OEM fever , iwant them all

[KeLeYTiS]

I ordered a set of wossners from the guy that sells them on ebay

They are a bit lighter than the oem ones (about 10 grams ) that was a nice thing to know , they have exactly the same weight (my scale starts from 0.1g) the oem ones often dont have the same weight (especially the RGV ones

[KeLeYTiS]

Now iam cleaning the engine cases , they need a little bit more

I also smoothed out some mold marks so the fuel flow can be smoother ,any opinion on this is welcomed or something extra i should do

[kr-rz350]

Good luck and thank you for documenting this...I'll be tackling this in the near future

[Paul]

A lot of work been done here, dunno why I didn't see this post earlier
Cases look great and pipes to
Gonna be a cracker

[Paul]

I ordered a set of wossners from the guy that sells them on ebay

They are a bit lighter than the oem ones (about 10 grams ) that was a nice thing to know , they have exactly the same weight (my scale starts from 0.1g) the oem ones often dont have the same weight (especially the RGV ones

Can you put a oem and wossner together and take a pic from the side showing the gudgeon pin on both so I can compare if they are copies of the oem or if you'll need head machining.

[Louis]

any opinion on this is welcomed or something extra I should do

Sadly all my pictures are lost du to my PC crash a couple off weeks back, I only have the pictures that I have uploaded

But here you have some ideas/problems that need sorting out.






Cheers

[KeLeYTiS]

Thanks guys for the replies

Louis are these 3MA-00 cases or 3MA-10 ? I noticed the 8-pedal reed cases that the 3MA-00 has ,very helful i will check these today

Paul i will take some today