CNC machine shop ??

[Franck]

Hello,

Does anyone have a machine shop in this group ? ( I try to find before ask the question )

Thanks 

[thump566]

What is it you are looking to create please?

[Franck]

This one

Assembly on the pictures

You cannot view this attachment. You cannot view this attachment.You cannot view this attachment.You cannot view this attachment.You cannot view this attachment.

Triple tree & handle bar for my TZR with RSV1100V4 fork

Thanks

[Franck]

Aluminium 6061 T6 ....I'm charge of the anododizing

[Gooch]

You sure about 6061?  I made some clamps for my R6 earlier this year.  Granted, I gave my setup some very conservative inputs (IE the clamp is holding the full weight of the bike, as if I was riding and forgot to tighten the other clamp), but I was not very comfortable with the safety margin for 6061, yield strength ~276 MPa and this setup was at 200 MPa in a couple spots.  Even adjusting the model to remove the obvious stress concentrations I was still ~160 MPa peak, ended up going with 7075 instead.  It's a track bike, after all, probably gonna end up crashing it eventually.

[Franck]

I Gooch

I choose the 6061 T6 alloy for three reasons:

-The first one is 7075 alloy is hard to anodize because the % of cooper
-The second is....I'm an old guy wich ride relax 
-The last one is,I prefer that triple tree brok in case of knock ans either a king of breaker for the frame.

Thanks a lot for your very interesting feedback