Re: Tzr 4dl 350 ypvs hybrid.

[tzr350]

Hi all. Some of you may have seen my tzr on other forums but for the ones that have not here is my on going hybrid.
From this.

[tzr350]

To this.

[tzr350]

To this.
.
but then i highsided it a little.

[tzr350]

So with no luck getting new fairings i thought i would use somthing that is up to date and plenty of fairing parts so it now looks like this.

[Need4speed]

Great transformation 

[paul8899]

Looking very nice , hope you take more care of it this time 

[tzr350]

Are you taking the p..s paul. Ha ha.

[tzr350]

Any updates on your bike paul. Its been a long while since you have posted anything.

[ybk]

Those R125 fairings are real nice, almost as if it was made for the 3MA frame! You should get the tailpiece as well! The swingarm fits the build and shape of the frame quite well.

[tzr350]

No can do on the tail fairings as its not big enough to house the fuel injection ecu, relays,battery ect ect. Also the airbox wont fit and i dont want it looking too much like an R125.
Cant wait to pull upto the lights with an R125 to my left and then race them off the lights. The look on their face will be classic.

[stevewr250]

Hi TZR350 you'r bike look's great in all it's forms but the TZR look was far the best look

[Paul]

very interesting to see the different guises
would like to see the engine
also, what forks are those?

[paul8899]

Any updates on your bike paul. Its been a long while since you have posted anything.

It has been a while hasn't it, unfortunately there hasn't been anything of note done on it for a while.
I've got most of the engine bits for it, just have to make the engine mounts and then I can start making some progress.

Because it's taking a little longer than I thought I bought a 3ma to play on which now wears some of the bits I made for the other Tzr. One of the good things of using those parts is that I can road test them , and luckily enough the front wheel hasn't fallen off yet

Have you had your bike on the dyno since you've fitted the fuel injection ?

[tzr350]

Hi guys. The forks are gsxr400gk76 with rgv wheel and a custom made speedo blank. Rear wheel is gk76. K5 tail, cbr600 rear shock, szr660 swingarm, r125 tank and front fairings. Rd 350ypvs motor still in a million bits. Microsquirt stand alone ecu, r6 38mm throttle boddies, bigger alloy rad, r1 clocks, tzr 250 1kt airbox.
The bike has not run for over a year now paul. I have to make a custom wiring loom plus i want a 421 top end but my funds wont stretch to that.

[Rizkhan]

TZR350 I would like to know how did you fit your engine. Can you share Frame engine mounting photos.