Fitting a IGNITECH to a 3XV

[Paul]

hi all
i posted this on the previous site
for the following item: http://www.ignitech.cz/english/dccdip2_race/dccdip2_race.htm for the yamaha 3XV wiring diagram
and in the interest of further development and hopefully to help others make the move to HP for "free", i post the wiring which took me ages to figure out due to my lack of intelligence (electrically)

Race             3XV

WHITE           GREY
ORANGE        ORANGE
D.BLUE         BLACK
RED              RED/WHITE
GREEN          BLACK/BROWN
GREEN          BLACK/RED
BROWN        W/GREEN
YELLOW        W/BLUE
W/BLUE        W/RED
W/RED         YELLOW/BLUE
L.BLUE         W/BLACK AND PINK

mine is a 3XV 91R, i do not have TPS, powerjets or airjets connected, the above is basic and PV only, sorry i can't help you any further down that road.

[muz_j]

Thanks a heap Paul!

You've just saved me a whole lot of time staring at wiring diagrams in a couple of weeks.
I owe you a beer or two for that...pity I'm guessing you live on the other side of the world!

Very useful information - much appreciated!

[Paul]

Shot for that. I accept cases of Brains Smooth SA via airmail 
There are 2 greens, I have black/brown to pin 4. I actually have no idea if it matters if they are the wrong way round. 2 greens!!! wtf, why Larry why? Added confusion IMO.

[uminom]

I have a drawing form Ignitech if that helps for the connection. But i have not tried it out jet

[uminom]

I have a DCCDIP2 not Race.
Can anybody confirm the wiring diagram that i made ?

Please see attached file.

[eyrey1]

i bought a loom kit from them it was 36 euro posted its streight plug and play !
i can post pics if needed dc-cdi-p2 box
hth gary

mine has 13 wires plugg'd in

[uminom]

Hi Gary , yes would be good to see. Do you have the race or the normal ignition. I got a wiring plan from then. But it is not correct. I just wounder why they give wrong wiring plans if they know how to make a wiring loom. Did you get it direct from ignitech ?

[eyrey1]

yes i bought it direct from them last week
its not the race one its a
dc-cdi-p2
i will try to work out how to picture it so it helps you !

[eyrey1]

sorry but for some reason the forum wouldnt let me post pics and i could only put one link on one page !
http://www.picamatic.com/view/8876395_IMG_0193%5B1%5D/

[eyrey1]

http://www.picamatic.com/view/8876393_IMG_0192%5B1%5D/

[eyrey1]

http://www.picamatic.com/view/8876392_IMG_0191%5B1%5D/

[eyrey1]

http://www.picamatic.com/view/8876391_IMG_0187%5B1%5D/

[eyrey1]

http://www.picamatic.com/view/8876390_IMG_0186%5B1%5D/

[eyrey1]

http://www.picamatic.com/view/8876389_IMG_0185%5B1%5D/

[Paul]

I to asked them to wire me up like that. I was stoked thinking I saved myself hours of work. Well they got it completely wrong. Even following their own wiring colour chart they got it wrong.
Cut cut cut.
Use my list above. It'll get your bike running and you can add TPS etc as you go.