Ignition switch

[Wilf]

I have had a bit of an ongoing issue with my electrics for a while but seeing as the bike starts and runs I have sort of ignored it.
Seeings as I am having a bit of a binge I thought I should really look at the issue, I took the switch apart which went everywhere and I saw that only half the wires were connected to the switch, but as I said the bike still ran OK.
The ones connected are the Black/white, the brown and the red. The solid black (ground) blue/white and Blue/red had come loose. Does anyone have a picture or know which lumps of solder I need to reconnect what cables to? I have a wiring diagram in the manual but does not show in detail what connections are what on the little plastic disc. The sad thing is I am an electrician by trade but that does not help that much when it comes to DC vehicle wiring